sales@pinehillequipment.com | 508-636-5971 | 655 Pine Hill Rd. Westport, MA 02790 USA
* Please contact us for more information and prices.
** Please click here for new equipment and products.
*** Unless stated otherwise, all used equipment is sold as is where is. There is no warranty expressed or implied.
Email here or call 508-636-5971 for questions/pricing
Year of Manufacture: 2002
Lifting moment: 98.1 kNm (10 mt) = 72,330 ft lbs
Maximum rope winch capacity: 3000 kg = 6,610 lbs
Rope length: 41 m + 134' 6''
Maximum outreach: 5.0 m = 16' 5''
Crane (dry) weight: 890 kg = 1,962 lbs
Slewing angle: 260 deg.
Slewing torque (net): 11.8 kNm (1.2 mt) = 8,680 ft lbs
Operating pressure: 31 MPa (310 bar) = 4,495 psi
Pump capacity: 40-60 l/min = 10.5 – 15.8 gpm
Auxiliary stabilizers Weight: 260 kg = 573 lbs
Includes Radio Control System
4,080 LBS @ 16.5 FT (max reach)
6,060 LBS @ 11.5 FT
10,140 LBS @ 6.5 FT (max lift)
Winch includes 3 wrap device.
Radio available.
Control Stand Available.
Year: Unknown
Max lifting moment 74,740 FT/LBS
Max lifting capacity 12,570 LBS
Max hydraulic outreach 18.3 FT
Slewing angle 400°
Slewing torque 9,370 FT/LBS
Max operating pressure 4,785 PSI
Recommended pump 7.9 US GPM to 11.9 US GPM
Dead weight (std.) 2,510 LBS
Capacity on hook:
6062 LBS @ 12.1 ft
4056 LBS @ 18.3 ft
Winch not Included
HPU not included.
Valve shipped loose.
Model: MR 525-SSA
Heavy Duty, High torque, Low speed.
523.9 Cubic Inch
Max Continuous Speed: 80 RPM
Max Continuous Output: 220 HP
Max Continuous Pressure: 3000 PSI
Max Continuous Output torque: 19520 FT/LBS
Dry Weight: 1698 LBS
Price upon request.
Shaft can be cut to make an SS
Please click here for a spec sheet.
Once reconditioned this unit will be – Spline shaft is 85%, motor is clean inside. Supplied blasted and in zinc primer. Motor was entirely disassembled, inspected and resealed with shaft saver on shaft. Motor has six bolt flange connections.
Single Speed
Heavy Duty, High torque, Low speed.
374.2 Cubic Inch
Max Continuous Speed: 90 RPM
Max Continuous Output: 165 HP
Max Continuous Pressure: 3000 PSI
Max Continuous Output torque: 13,750 FT/LBS
Dry Weight: 1444 LBS
Price upon request.
Click for sales brochure here>>
PICTURES UPON COMPLETION.
Severe duty air-cooled oil cooler, Industrial series heat exchangers with direct hydraulic cooling fan. One pass. Rated to 300 degrees F @ 200 PSIG. 65 PSI. High performance turbulator. Serviceable core. 23,350 CFM Air Flow. 1160 RPM, 13.7 GPM Weight: 1062 LBS Dry. Comes with custom oil filter on board. TWO UNITS AVAILABLE! Part of a larger HPU to be disassembled.
Please click here for a spec sheet.
Planetary winch with equal speed forward and reverse.
Bare Drum 25,000 LBS/ 140 FPM / 651 FPM
Mean Drum 18,378 LBS / 218 FPM / 1,018 FPM
Full Drum 11,757LBS / 297 FPM / 1,384 FPM
Wire Capacity:
1520 ft of 7/16" wire rope
515 ft of 3/4" wire rope
Rebuilt by PHE technician. Carries a 90 day warranty.
Used Diesel Mechanical Winches (Air Controlled)
SINGLE DRUM PERFORMANCE
Efficiency Range Bare Drum Average Drum Full Drum
High 64,726 Lbs @ 71 FPM 37,251 LbS @ 124 FPM 28,307 Lbs @ 163 FPM
Average 87,045 Lbs @ 51 FPM 50,096 Lbs @ 88 PPM 38,068 Lbs @ 116 FPM
Low 202,026 Lbs @ 6 FPM 116,270 Lbs@ 11 FPM 88,353 Lbs@ 15 FPM
Stall 203,000 Lbs @ 0 FPM 116,700 Lbs @ 0 FPM 88,500 Lbs @ 0 FPM
Drum Size
Flange diameter (inches): 47
Barrel diameter (inches): 19
Barrel length (inches): 24
Cable Capacity
1-1/8 inch : 2,300 FT
1-1/4 inch : 1,850 FT
1-3/8 inch :1,530 FT (Max Cable Size)
Aprox Weight: 26,000 each = 15’ Long x 8’6” Wide x 7’ Height
Good Used condition. Location: Westport, MA - CALL BOB @ 508-400-6292 FOR PRICE and with questions.
It makes a strong towing winch. Carries 1500 ft of 1 1/2 wire rope and has 60,000 lb. bare drum line pull. The winch has been converted to hydraulic and air operated brake/clutch. The winch appears to never have been used. Hydraulics are new installed by Pine Hill Equipment. Includes level wind. Call ex 215 for pricing.
Planetary hydraulic winch.
Line pulls @ 2,500 PSI: Line speeds hauling @ 54 GPM:
Bare drum - 27,000 lbs. 88 fpm
Mean drum - 19,000 lbs. 125 fpm
Full drum - 14,000 lbs. 163 fpm
Wire rope capacity:
1,100 feet - 1”wire rope.
- Winch is power in/ power out equal speed unit.
- Winch has an automatic, hydraulically released, spring applied parking brake.
- Winch also has a manually applied parking brake.
- Winch has a 14” diameter core, 26” diameter flange, and a 40” drum width.
Condition: Good Running Take Off.
6,000 LBS Continuous running line pull 1st layer
16,500 LBS Stall Line Pull
Mid Drum Line Speed: 30 FPM
Break Holding Capacity: 20 Tons
The 20HR-E1 Harbor Tug Winch was designed specifically for small pushboats and harbor tugs to save time in making up tows. The entire winch is designed with only 3 bushings, resulting in reduced maintenance and more up time.
Click here for a detailed spec sheet.
Standard Features:
• 5.4 High Efficiency Horsepower TEFC Motor and Brake
• 230/460 Volt - 3 Phase - 60 Hz Power
• Spring set - Electric release holding brake
• Fully enclosed gearbox with open final gear set
• Machine cut gearing with protective guarding
• Brake release and manual crank for emergency operation
Wire Storage:
5/8" = 380 FT
3/4" = 275 FT
78" = 194 FT
1" = 132 FT
